How To Reset Raycon Earbuds In 5 Easy Steps

If you’re experiencing issues with your Raycon earbuds, such as disconnection or low battery life, resetting them may help. Resetting your earbuds is a simple process that you can do in just a few minutes. This article will walk you through the steps on how to reset Raycon earbuds.

What You’ll Need

• A computer or mobile device with internet access
• Your Raycon earbuds
• A USB cable
• The charging case for your earbuds

How To Reset Raycon Earbuds In 5 Easy Steps

1. Make sure your Raycon earbuds are powered off and remove them from the charging case.

2. Connect the USB cable to the charging case and plug it into a USB port on your computer or mobile device.

3. Press and hold the button on the charging case for 10 seconds to put the earbuds into pairing mode.

4. Open the “Bluetooth” settings on your computer or mobile device and select “Raycon E25” from the list of available devices.

5. Click “Pair” to complete the pairing process

READ MORE: How To Pair Soundcore Earbuds With Different Devices

Once your Raycon earbuds are reset, they should be working properly. However, if you continue to experience issues, you may need to troubleshoot further. First, make sure your earbuds are fully charged. If they’re still not working properly, try restarting your computer or mobile device and then repeat the reset process. If that doesn’t help, you may need to contact Raycon customer support for further assistance.

With that, you now know how to reset your Raycon earbuds. This should fix any issues you’re experiencing with them, but if it doesn’t, make sure to reach out to customer support for further help. Remember to keep your earbuds fully charged and to follow the proper care instructions to keep them working properly.

Conclusion

Now that you know how to reset raycon earbuds, you can get back to enjoying your music, podcasts, and other audio content. Have a great time with your Raycon earbuds!

Frequently Asked Questions

1. How do I pair my Raycon earbuds with my device?

To pair your Raycon earbuds with your device, start by turning on your Bluetooth and putting your earbuds in pairing mode.

To put your earbuds in pairing mode, follow these steps:

1. Remove your earbuds from the charging case.

2. Hold the multi-function button on both earbuds for 3 seconds.

3. The LED lights will start flashing blue and red. This indicates that the earbuds are in pairing mode.

Once your earbuds are in pairing mode, go to your device’s Bluetooth settings and look for “Raycon E25” in the list of available devices. Select it to pair. You’ll know the pairing is successful when the LED lights stop flashing and remain solid blue.

If you’re still having trouble pairing your earbuds, make sure that your device’s Bluetooth is turned on and that your earbuds are within range. Additionally, check to see if your device’s operating system is up to date and that your earbuds are charged.

If you continue to experience issues pairing your Raycon earbuds, please refer to the user manual or contact customer support for more help.

2. How do I know when my Raycon earbuds are fully charged?

The best way to know when your Raycon earbuds are fully charged is to check the LED lights on the charging case. When the earbuds are charging, the LED lights on the case will be solid red. Once they’re fully charged, the lights will turn off. Additionally, you can check the battery level of your earbuds by opening the charging case lid while they’re inside. The LED lights on the earbuds will indicate the battery level:

• Solid green: 100% charge
• Blinking green: 75-100% charge
• Blinking yellow: 50-75% charge
• Blinking red: 25-50% charge
• Blinking red: 0-25% charge
• Solid red: critical low battery

If your earbuds are fully charged, the LED lights on the case and the earbuds will be off. It’s important to note that the LED lights on the case will stay on while the earbuds are charging, even if the earbuds are fully charged. So, if you want to know the battery level of your earbuds, it’s best to check them directly.

With this information, you should be able to keep track of the battery level

3. How long does it take to charge the earbuds?

It takes approximately 1-2 hours to fully charge your Raycon earbuds. The charging time may vary depending on the battery level and the type of charger you’re using.

If you’re using a standard 5V/1A charger, it will take around 2 hours to fully charge your earbuds. If you’re using a higher-voltage charger, such as a 9V/2A charger, the charging time may be reduced.

It’s also important to note that the charging time may vary depending on the age and condition of your earbuds. Over time, the battery life of your earbuds may decrease, which means that it may take longer to charge them. Additionally, if your earbuds are damaged, they may not charge properly or may not charge at all.

So, if you find that your earbuds are taking longer to charge than usual, it’s a good idea to inspect them for any signs of damage. If you notice any damage, such as cracks or dents, it’s best to contact customer support for assistance.

Additionally, it’s important to use the charging case that came with your earbuds to ensure optimal charging performance. Using a different case or charger may affect the charging time and may even damage your earbuds.

One last thing to keep in mind is that the charging time may also be affected by the ambient temperature. If the temperature is too cold or too hot, it may take longer to charge your earbuds. So, it’s best to charge them at room temperature for optimal performance.

By following these tips, you can ensure that your Raycon earbuds are charged quickly and efficiently.

4. What is the battery life of the earbuds?

The battery life of the Raycon earbuds varies depending on how you use them. On average, you can expect to get around 4-5 hours of playtime on a single charge. This means that you can listen to music, make calls, or watch videos for up to 4-5 hours without needing to recharge your earbuds.

However, this is just an estimate and your actual battery life may vary depending on factors like the volume level, the type of content you’re listening to, and how often you’re using the touch controls. For example, if you’re listening to music at a high volume level or watching videos with the screen on, the battery life will be shorter than if you’re listening to music at a lower volume level or have the screen off. Additionally, using the touch controls frequently can also reduce the battery life of your earbuds.

If you’re worried about running out of battery life, you can always use the charging case to recharge your earbuds. The charging case can provide up to an additional 4-5 hours of playtime, so you’ll have plenty of power to get through a full day of use. And, if you need to recharge your earbuds on the go, the charging case supports fast charging, so you can get up to an hour of playback time with just 15 minutes of charging.

To get the most out of your battery life, it’s best to keep your earbuds in the charging case when you’re not using them. This will help preserve the battery life and ensure that you have power when you need it. Plus, the charging case is small and lightweight, so it’s easy to take with you on the go.

5. Can I use only one earbud at a time?

Absolutely, you can use either one of the earbuds on its own. This is called “mono mode.” Mono mode is a convenient feature that allows you to use just one earbud for calls, music, or anything else you want to do. You can also switch between mono and stereo modes at any time.

To switch to mono mode, simply take one earbud out of the charging case and place it in your ear. The earbud will automatically connect to your device and you’ll be able to use it on its own. You can also manually switch to mono mode by opening the Raycon app and selecting “Mono” from the audio settings.

Mono mode is a great feature for those times when you want to be aware of your surroundings or just don’t want to wear both earbuds. It’s also a handy feature if you’re running low on battery life, as it can help you conserve power by using only one earbud.

Just keep in mind that not all features will be available in mono mode. For example, you won’t be able to use the equalizer or bass boost features. And, if you’re listening to music in mono mode, the sound may not be as full and immersive as it would be in stereo mode. But, for everyday tasks like taking calls or listening to audiobooks, mono mode should work just fine.

Keep in mind that to switch back to stereo mode, you’ll need to put both earbuds back in the charging case and then take them out again. This will re-pair the earbuds and put them in stereo mode. Once you’re in stereo mode, you can enjoy all the features and benefits of the Raycon earbuds.